"Have not fitted parts yet."
Upper and lower burr assy (7 15 16 20) ( UPPER and LOWER BURR ASSEMBLY EM0480 )
Location Ref: 1
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Jennifer
QLD
"Sit it in the top of the motor. this one didnt come with a handle so may have been slightly tricker."
Matt
NSW
"Simple - remove one nut and slot in the parts"
Francis
QLD
"Just drop in and turn which should be easy but it is quite tricky in fact (upper cone), lower rotating cone is tight and hasnt been done as the old one is quite good"
Sian
VIC
"There were no instructions with the part but it was fairly straightforward. the only thing someone needs to know is that the nut on the grinder turns the opposite way to unscrew to remove the lower burr. so that is clockwise instead of anti-clockwise."
Andrew
NSW
".xgh"
Greg
QLD
"Undo the burr nut, remove the worn burr, replace with new burr with spacer washers. replace burr nut. test if spacers are required."
Brad
QLD
"Dismantle clean fit new parts re-assemble"
