"Easily fitted by using supplied hex key and replacing seal. only apparently this was not our issue as the group head is still leaking."
SEAL FOR SHOWER HEAD
Location Ref: 1.2
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Greg
SA
"Remove screw, shower screen and distribution block from group head taking care to observe correct orientation of the parts. then remove the old seal. install new seal. reinstall screw, shower screen and distribution block and tighten screw."
Tony
VIC
"Easy"
Robert
NSW
"Simple replacement"
Mick
VIC
"Remove filter screen, remove seal, instal new seal, reinstall filter screen"
Danny
VIC
"Disconnect power. remove water tank use a towel to clean up any spilt water, tip machine over on its back, use allen key to remove silver shower screen, prise out old washer, clean inside head with paper towelling and reseat new washer in place. replace shower screen and secure in place with screw using the allen key. tip machine back to vertical and insert water tank. fill tank and test."
David
NSW
"Unscrewed, shower screen removed. leveraged out old seal. cleaned grinds etc out of group head. installed new seal."
Barry
NSW
"Simple installation."
Frank
QLD
"Unscrew shower screen. press seal into place. re-attach shower screen. didnt fix the problem. the problem is a broken collar which i ordered from another supplier because big warehouse is out of stock."
John
QLD
"Using the allen key that came with the appliance remove the show head and replace with the new part"
