"Would love to but havent received the part yet."
LOCATOR FOR PORTA FILTER
Location Ref:
Exploded diagrams, Schematics and other documents
Installation
Tim
QLD
"Take water container off. unscrew back and top and remove. cut cable tie holding water line on so back can be totally removed. unscrew grinder and lift up. unscrew white square block under grinder. unscrew micro switch. unscrew the 4 screw holding the locator, 2 at the top, 2 behind the micro switch."
Colin
AUCKLAND
"Go on to youtube, lots of help"
Chris
NSW
"Remove the water tank, then unscrew the rear panel. unscrew and move the control board to access the interior screws. remove the screws holding the filter holder in place and then remove the part. reverse the process to reassemble."
Paul
NSW
"Requires removal of top and back covers and then dismounting of electrical connection box to access 4 x screws."